Milwaukee M18 FUEL 2841-20 - User Manual

Cat. No. / No de cat.
2841-20
M18 FUEL™ 16GA ANGLED FINISH NAILER
CLOUEUSE DE FINITION ANGULAIRE 16GA M18 FUEL™
CLAVADORA PARA ACABADOS ANGULAR 16GA M18 FUEL™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

Summary

General Power Tool Safety Warnings

Work Area Safety

Electrical Safety

Personal Safety

Power Tool Use and Care

Power Tool Use and Care

Battery Tool Use and Care

Service and Nailer Safety Warnings

Nailer Safety Warnings

Specific safety instructions for operating nail guns, including fastener handling and accidental firing.

Operation Modes and Features

Operation

Key operational procedures and safety requirements before using the tool.

Tool Functionality and Troubleshooting

Setting the Depth of Drive

Clearing a Jammed Fastener

Step-by-step guide to safely remove a jammed fastener from the tool.

Maintenance and Testing

Required Daily Testing

Essential daily checks to ensure the tool's safe and correct operation before use.

Maintenance

General maintenance, cleaning, and repair guidelines for the power tool.

Milwaukee M18 FUEL 2841-20 Specifications