Milwaukee M18 FUEL 2839-20 - User Manual

Cat. No. / No de cat.
2839-20
M18 FUEL™ 15GA ANGLED FINISH NAILER
CLOUEUSE DE FINITION ANGULAIRE 15GA M18 FUEL™
CLAVADORA PARA ACABADOS ANGULAR 15GA M18 FUEL™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

Summary

General Power Tool Safety Warnings

Work Area Safety

Guidelines for maintaining a clean, well-lit, and safe work environment.

Electrical Safety

Precautions regarding plugs, cords, and protection against electric shock.

Personal Safety

Emphasizes operator alertness, common sense, and use of personal protective equipment.

Service Information

Service Requirements

Nailer Safety Warnings

Specific safety precautions for operating the nailer.

Operation

Actuation Mode Selection

Single Sequential Actuation Operation

Step-by-step instructions for using sequential actuation mode.

Contact (Bump) Actuation Operation

Step-by-step instructions for using bump actuation mode.

Tool Functions and Maintenance

Setting the Depth of Drive

Clearing a Jammed Fastener

Retracting a Dropped Striker

Required Daily Testing and Maintenance

Required Daily Testing

Daily checks to ensure the tool is operating safely and correctly.

Maintenance

Milwaukee M18 FUEL 2839-20 Specifications