Milwaukee M18 FUEL 2833-20 User Manual

Cat. No. / No de Cat.
2833-20
M18 FUEL™ 6-1/2" CIRCULAR SAW
SCIE CIRCULAIRE DE 165 mm (6-1/2") M18 FUEL™
SIERRA CIRCULAR DE 165 mm (6-1/2") M18 FUEL™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

Milwaukee M18 FUEL 2833-20 Specifications

General

Type	Circular Saw
Voltage	18V
Power Source	Battery
Motor Type	Brushless
Arbor Size	5/8 inches
No Load Speed	5, 800 RPM
Cut Depth at 45 Degrees	1-7/8 in
Max Cutting Depth at 45°	1.875 in
Tool Length	14.5 inches
Blade Diameter	7-1/4 inches

Summary

General Power Tool Safety Warnings

Work Area Safety

Guidelines for maintaining a clean and well-lit work area to prevent accidents.

Electrical Safety

Precautions to prevent electric shock from power tools.

Personal Safety

Operator awareness and protective measures for safe tool operation.

Power Tool Use and Care

Battery Tool Use and Care

Specific Safety Rules for Circular Saw

Cutting procedures

Essential safety steps and precautions during cutting operations.

Lower guard function

Details the operation and checks for the lower guard.

Functional Description

Specifications

Symbology

Assembly

Removing/Inserting the Battery

Procedure for safely installing and removing the battery pack.

Selecting Blade

Guidelines for choosing and using the correct saw blade.

Checking the Operation of the Lower Guard

Procedure to check the functionality of the lower guard.

Universal Dust Port Adapter

Instructions for attaching a vacuum hose for dust collection.

Adjusting Depth

Adjusting the Blade to Shoe

Adjusting Bevel Angle

Operation

General Operation

Step-by-step guide for performing cuts with the saw.

Electric Brake

Explanation of the electric brake function and its behavior.

Troubleshooting

Common issues and solutions for saw performance.

Cutting Large Panels

Techniques for safely cutting large panels.

Cross-Cutting Wood

Guidance on cutting wood across the grain.

Ripping Wood

Plunge Cutting

Overloading

Maintenance

Maintaining Tool

Routine checks and upkeep for the power tool's condition.

Cleaning

Repairs

Accessories

Service - United States

Service - Canada

Limited Warranty USA & Canada