Contents [ hide
1 GENERAL POWER TOOL SAFETY WARNINGS
2 WORK AREA SAFETY
3 POWER TOOL USE AND CARE
4 BATTERY TOOL USE AND CARE
5 SERVICE
6 SPECIFIC SAFETY RULES FOR DRILL/DRIVER
7 SYMBOLOGY
8 SPECIFICATIONS
9 FUNCTIONAL DESCRIPTION
10 ASSEMBLY
11 OPERATION
11.1 Installing Bits
11.2 Selecting Drill or Drive Action (Cat. No. 2606-20)
11.3 Selecting Hammer, Drill or Drive Action (Cat. No. 2607-20)
12 APPLICATIONS
12.1 Overloading
13 MAINTENANCE
14 ACCESSORIES
15 LIMITED WARRANTY USA & CANADA
16 LIMITED WARRANTY – MEXICO, CENTRAL AMERICA &
CARIBBEAN
17 SERVICE – UNITED STATES
18 SERVICE – CANADA
19 File Downloads
20 References
21 Related Manuals
GENERAL POWER TOOL SAFETY WARNINGS
WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to
follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for
future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
WORK AREA SAFETY
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool
while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating
power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid
safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or
battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power
tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in
unexpected situations.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose
clothes, jewelry or long hair can be caught in moving parts.
If devices are provided for the connection ofdust extraction and collection facilities, ensure these are connected and
properly used. Use of dust collection can reduce dust-related hazards.
Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety
principles. A careless action can cause severe injury within a fraction of a second.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better
and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
To Next Page
