Need help?Do you have a question about the Milwaukee MW600 and is the answer not in the manual?
Steps for calibrating the meter using zero oxygen solution for accurate readings.
Procedure for performing slope calibration in water-saturated air for meter accuracy.
Guidance on adjusting dissolved oxygen readings based on changes in altitude.
Method for correcting dissolved oxygen measurements for salt concentration or salinity.
Instructions for cleaning the platinum cathode to maintain sensor performance.
Importance of membrane surface integrity for accurate dissolved oxygen measurements.
Steps for calibrating the meter using zero oxygen solution for accurate readings.
Procedure for performing slope calibration in water-saturated air for meter accuracy.
Guidance on adjusting dissolved oxygen readings based on changes in altitude.
Method for correcting dissolved oxygen measurements for salt concentration or salinity.
Instructions for cleaning the platinum cathode to maintain sensor performance.
Importance of membrane surface integrity for accurate dissolved oxygen measurements.
General| Dimensions | 145 x 80 x 40 mm |
|---|---|
| Weight | 220 g |
| Operating Humidity | max RH 95% |
| Warranty | 2 years |
| Environment | 0 to 50°C |
| Operating Temperature | 0 to 50°C (32 to 122°F) |
| Sensor Type | pH |
| Battery Type | 1 x 9V battery |
To Next Page
