Milwaukee T75 User Manual

ISTRT75R1 06/02
T75 and T76
Waterproof TDS meters
USER MANUAL
SPECIFICATIONS
Range T75 0 to 1999 ppm (mg/L)
T76 0 to 9990 ppm (mg/L)
Resolution T75 1 ppm (mg/L)
T76 10 ppm (mg/L)
Accuracy (@20°C) ±2% F.S.
Typical EMC ±2% F.S.
Deviation
Temperature Automatic,
Compensation 0 to 50°C with β=2%/°C
TDS factor 0.5
Calibration Manual, at 1 point
through trimmer
Probe T75 MA73075 (replaceable)
T76 MA73076 (replaceable)
Environment 0 to 50°C; 100% RH
Battery type 3 x 1.5V, alkaline
Battery life approx. 250 hours of
continuous use
Dimensions 165 x 30 x 30 mm
Weight 80 g
ACCESSORIES
MA73075 Replaceable Conductivity
probe, LR
MA73076 Replaceable Conductivity
probe, HR
M10032B 1382 ppm (mg/L) calibration
solution, 20 mL (25 pcs)
M10038B 6.44 ppt (g/L) calibration
solution, 20 mL (25 pcs)
This meter is in compliance with the CE directives.

Milwaukee T75 Specifications

General

Brand	Milwaukee
Model	T75
Category	Measuring Instruments
Language	English

Summary

Specifications Overview

Range and Resolution

Defines the measurement limits and precision for TDS in ppm (mg/L).

Accuracy and EMC Deviation

Specifies the accuracy percentage and typical electromagnetic compatibility deviation.

Temperature Compensation

Describes automatic temperature adjustment for readings between 0-50°C.

Calibration and TDS Factor

Outlines the manual, one-point calibration process and the TDS factor.

Probe and Environment Details

Lists compatible probe models and operating environment conditions.

Battery and Dimensions

Details battery type, approximate life, and device dimensions.

Accessories

Replacement Probes

Lists replaceable probe models MA73075 (LR) and MA73076 (HR).

Calibration Solutions

Lists calibration solutions M10032B (1382 ppm) and M10038B (6.44 ppt).

Calibration Procedure

Operation Guide

Probe Replacement

Battery Replacement

Warranty Information