Do you have a question about the Milwaukee M12 3PL and is the answer not in the manual?
Model | M12 3PL |
---|---|
Voltage | 12V |
Power Source | Battery |
Laser Class | Class II |
IP Rating | IP54 |
Accuracy | ±1/8 in. at 30 ft |
Accuracy @ 30 ft | ±1/8 in. |
Self-Leveling Range | ±4° |
Operating Temperature | 14°F - 122°F |
Type | 3-Plane Laser Level |
Identifies the laser's safety classification according to EN60825-1:2014.
Crucial warnings and guidelines for safe laser operation and handling.
Guidance on how to clean the laser aperture lens and body.
Details on operating environment, laser class, range, accuracy, and wavelength.
Identifies key parts of the laser level, including buttons, indicators, and mounts.
Details about the M12 battery and tripod mounting options.
Lists accessories not included in standard equipment but available separately.
Step-by-step visual guide for replacing batteries.
Visual representation of battery life status displayed by the fuel gauge.
How to fix the track clip to pillars or ceiling channels.
Describes blinking patterns and automatic shutdown for low battery.
How to attach the laser to walls or pillars using mounts or screws.
Using the green target plate and pivot adjustment knob.
Details on using the 1/4" and 5/8" tripod mounts.
Steps to set up and project horizontal and vertical planes.
How to choose planes and what happens if the level exceeds the range.
Procedure to turn off the laser and lock the pendulum before moving.
Steps to set up and project laser planes without self-leveling.
Notes on beam interruption and how to tilt for desired angle.
How to turn off the laser from manual mode.
When to use the detector for outdoor or long-range applications.
Recommends periodic accuracy checks, especially after drops or mishandling.
Procedure to measure the vertical deviation of the horizontal plane.
Procedure to measure the side-to-side deviation of the horizontal plane.
Procedure to check the vertical accuracy of the laser beam.