Milwaukee MW500 User Manual

USER MANUAL
MW500
PRO ORP Meter
milwaukeeinstruments.com (USA & CAN)
milwaukeeinst.com
CERTIFICATION
Milwaukee Instruments conform to the
CEEuropean Directives.
Disposal of Electrical & Electronic
Equipment. Do not treat this product as
household waste. Hand it over to the
appropriate collection point for the recycling of
electrical and electronic equipment.
Disposal of waste batteries. This product
contains batteries. Do not dispose of them
with other household waste. Hand them
over to the appropriate collection point for recycling.
Please note: proper product and battery disposal
prevents potential negative consequences for human
health and the environment. For detailed information,
contact your local household waste disposal service
or go to www.milwaukeeinstruments.com (USA &
CAN) or www.milwaukeeinst.com.
RECOMMENDATION
Before using this product, make sure it is entirely
suitable for your specific application and for the
environment in which it is used. Any modification
introduced by the user to the supplied equipment
may compromise the meter’s performance. For your
and the meter’s safety do not use or store the meter in
hazardous environment. To avoid damage or burn, do
not perform any measurement in microwave ovens.
WARRANTY
This instrument is warranted against defects in
materials and manufacturing for a period of 2 years
from the date of purchase. Probe is warranted for
6 months. This warranty is limited to repair or free
of charge replacement if the instrument cannot be
repaired. Damage due to accidents, misuse, tampering
or lack of prescribed maintenance is not covered by
warranty. If service is required, contact your local
Milwaukee Instruments Technical Service. If the repair
is not covered by the warranty, you will be notified of the
charges incurred. When shipping any meter, make sure
it is properly packaged for complete protection.
Milwaukee Instruments reserves the right to make
improvements in design, construction and appearance
of its products without advance notice.
SATISFACTION
GUARANTEED
ISTMW500 07/20

Milwaukee MW500 Specifications

General

Model	MW500
Category	Measuring Instruments
Resolution	1 mV
Accuracy	±5 mV
Dimensions	145 x 80 x 40 mm
Weight	220 g
Display	LCD
Water Resistance	No
Warranty	2 years
Calibration	Manual
Environment	0 to 50°C / 32 to 122°F

Summary

CERTIFICATION

Disposal of Electrical & Electronic Equipment

Do not treat this product as household waste. Hand it over to the appropriate collection point for recycling.

Disposal of Waste Batteries

This product contains batteries. Do not dispose of them with other household waste. Hand them over for recycling.

RECOMMENDATION

Safe Usage and Environment

Ensure suitability for application and environment. Avoid modifications and hazardous environments for safety.

WARRANTY

Warranty Coverage and Limitations

Covers material/manufacturing defects for 2 years (instrument) and 6 months (probe). Exclusions apply.

OPERATION

Initial Setup and Measurement

Connect electrode, immerse tip, turn on, and allow reading to stabilize before measurement.

Electrode Care After Use

Switch off meter, store electrode tip with storage solution in the protective cap.

MAINTENANCE

Electrode Cleaning and Storage

Keep electrode clean with rinse solution. Store tip moist and safe from mechanical stress.

BATTERY REPLACEMENT

Low Battery Indicator and Replacement

Low battery indicator appears; replace with alkaline 9V battery promptly for reliable measurements.

SPECIFICATIONS

Technical Specifications

Details range, resolution, accuracy, electrode type, environment, battery, dimensions, and weight.

OPTIONAL ACCESSORIES

Available Accessories

Lists optional items such as rinse solution, storage solution, and ORP electrode.