Milwaukee MC510 - User Manual

SPECIFICATIONS:
MC510
RANGE ±1000 mV
RESOLUTION 1 mV
ACCURACY (@25°C) ±5 mV
SETPOINT 0 to 600 mV
ALARM active when the measure is
lower/higher than setpoint
depending on user selection
OUTPUT POWER SOCKET active when the measure is
higher/lower than selected setpoint
(5A max) depending on user selection
ORP ELECTRODE MA921B/2 (included)
ENVIRONMENT 0 to 50°C, 95% RH max.
POWER SUPPLY 12 VDC (included)
POWER DRIVERS 2A, 60Hz or 230VAC, 1A, 50Hz
DIMENSIONS 148.5 x 82.5 x 32 mm
WEIGHT 180 g (meter only)
OPTIONAL ACCESSORIES:
MA921B/2 ORP Electrode with BNC connector and 2m cable
M10000B Electrode rinse solution, 20 mL sachet (25 pcs)
MA9015 Electrode storage solution, 220 mL bottle
WARRANTY:
This instrument is warranted from all defects in materials and manufacturing for a period of two
years from the date of purchase. The electrode is warranted for a period of 6 months.
If during this period, the repair or replacement of parts is required, where the damage is not due to
negligence or erroneous operation by the user, please return the parts to either dealer or our office
and the repair will be effected free of charge
Note: We reserve the right to modify the design, construction and appearance of our products
without advance notice.
USER MANUAL
PORTABLE
ORP METER
MODEL: MC510
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com

Summary

Product Specifications

Measurement Parameters

Details on range, resolution, and accuracy for ORP measurements.

Setpoint and Alarm Configuration

Configuration of setpoint values and alarm behavior.

Technical and Environmental Specs

Covers power supply, ORP electrode, environment, dimensions, and weight.

Optional Accessories

Accessory Product Codes

List of optional accessories like electrodes, rinse, and storage solutions.

Warranty Information

Operating the ORP Meter

Step-by-Step Operation Guide

Instructions for connecting power, electrode, and initiating measurement.

Setpoint Configuration

Adjusting the Setpoint Value

How to select and set the desired ORP measurement threshold.

Installation Procedure

Electrical Connection Diagram

Diagram and explanation for connecting the meter to power and mains.

Milwaukee MC510 Specifications

General

Brand	Milwaukee
Model	MC510
Category	Measuring Instruments
Language	English