Milwaukee MC125 User Manual

SPECIFICATIONS :
pH ORP
RANGE 0.00 to 14.00 ±1000 mV
RESOLUTION 0.01 1 mV
ACCURACY (@25°C) ±0.2 ± 5 mV
SETPOINT 4 to 8 pH -200 to 600 mV
ELECTRODE (included) MA911B/2 MA921B/2
ALARM & active when measurement is
OUTPUT POWER SOCKET higher/lower than the setpoint
depending on user selection
ENVIRONMENT 0 to 50°C, 95% RH max.
POWER SUPPLY 12 VDC (included)
POWER DRIVERS 115VAC, 2A, 60Hz or 230VAC, 1A, 50Hz
DIMENSIONS 148.5 x 82.5 x 32 mm
WEIGHT 200 g meter only
OPTIONAL ACCESSORIES:
M10004B pH 4.01 buffer solution 20 ml sachet (25 pcs)
M10007B pH 7.01 buffer solution 20 ml sachet (25 pcs)
M10010B pH 10.01 buffer solution 20 ml sachet (25 pcs)
M10000B Electrode rinse solution 20 ml sachet (25 pcs)
MA9015 Electrode storage solution 20 ml sachet (25 pcs)
WARRANTY:
This instrument is warranted from all defects in materials and manufacturing
for a period of two years from the date of purchase.
The electrodes are warranted for a period of 6 months.
If during this period, repair or replacement of parts is required, where the
damage is not due to negligence or erroneous operation by the user, please
return the parts to either dealer or our office and the repair will be effected
free of charge.
Note: We reserve the right to modify the design, construction and
appearance of our products without advance notice.
USER MANUAL
PORTABLE
pH I ORP COMBINED METER
MODEL: MC125
Test Equipment Depot - 800.517.8431
- 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com

Milwaukee MC125 Specifications

General

Range	0.00 to 14.00 pH
Resolution	0.01 pH
Operating Temperature	0 to 50°C
Display	LCD
Temperature Compensation	Automatic
Electrode	Included
Type	pH Meter
Battery	3 x 1.5V alkaline
Accuracy	±0.02 pH

Summary

Specifications

General Specifications

Details on pH and ORP ranges, resolution, accuracy, setpoint, electrode, alarm, power socket, environment, power supply, drivers, dimensions, and weight.

Optional Accessories

Accessory List

List of optional accessories including pH buffer solutions, rinse solution, and electrode storage solution.

Warranty Information

Product and Electrode Warranty

Details the warranty period for the instrument and its electrodes, covering defects in materials and manufacturing.

Operation Guide

Connecting and Initial Setup

Instructions for connecting the power adapter and electrodes, preparing electrodes, and initial meter operation.

Alarm and Output Socket Function

Explanation of the alarm LED indication and power availability at the output power socket.

Setpoint Configuration

Setpoint Selection and Nature

Guidance on selecting the desired setpoint value for pH and ORP, and configuring the alarm nature (above/below).

Calibration Procedure

Step-by-Step Calibration

Detailed steps for calibrating the pH/ORP meter using pH 7 and pH 4 solutions.

Recalibration Frequency

Recommendations for recalibrating the meter, including frequency and conditions.

Installation Procedure

Meter and Power Connection

Diagram and explanation of connecting the meter to the power supply and understanding its output socket function.