Milwaukee M12 3622-20 User Manual

Cat. No. / No de cat.
3622-20
M12™ CROSS LINE & PLUMB POINTS LASER
LASER À LIGNE TRANSVERSALE ET POINTS D’APLOMB M12™
LÁSER DE PUNTOS TRANSVERSALES Y DE PLOMADA M12™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

Milwaukee M12 3622-20 Specifications

General

Voltage	12V
IP Rating	IP54
Auto Shut-off	Yes
Water Resistance	Yes
Accuracy	+/- 1/16 in
Laser Class	II
Battery Type	M12
Laser Type	Red

Summary

General Power Tool Safety Warnings

Laser Safety

Guidelines for safe handling of laser emissions, including warnings against staring into the beam.

Specific Safety Rules for Laser Levels

Specifications

Symbology

Explanation of symbols used in the manual and on the product for clarity.

Functional Description

Assembly

Instructions for assembling or preparing the tool for initial use.

Power Save Mode

How to activate and use the power saving feature to extend battery life.

Fuel Gauge

Information on how to check the remaining battery charge level.

Operation

Turning On/Off

Steps to power the laser level on and off and select operating modes.

Using the Laser Level

Guidance on how to properly use the laser level for accurate measurements.

Troubleshooting

Accuracy Field Check

Influences on Accuracy

Factors affecting the accuracy of the laser level measurements.

Horizontal Height Accuracy

Procedure to check the horizontal accuracy of the laser level.

Horizontal Leveling Accuracy

Vertical Leveling Accuracy

Plumb Dot Accuracy

Maintenance

Maintain Laser Level

General guidelines for maintaining the laser level's condition.

Cleaning

Instructions for cleaning the tool and its lenses.

Repairs

Information on where and how to get the tool repaired.

Accessories

Information on using only designated accessories for safety.

Limited Warranty USA & Canada