OPTIONAL
ACCESSORIES
MA9004
pH 4.01 buffer solution, 230 mL bottle
MA9007
pH 7.01 buffer solution, 230 mL bottle
MA9010
pH 10.01 buffer solution, 230 mL bottle
Electrode
storage
solution,
CERTIFICATION
Milwaukee Instruments conform to the
CE European Directives.
Disposal of Electrical & Electronic
Equipment.
Do not treat this product as
household
waste.
Hand
it
over
to
the
appropriate
collection
point
for
the
recycling
of
MW102
PRO+
MA9015
230 mL bottle
electrical
and
electronic
equipment.
Disposal of waste batteries.
This product
Portable 2-in-1
General cleaning solution,
230 mL bottle
M10000B
Rinse solution, 20 mL sachet (25 pcs.)
pH electrode with BNC connector and
1 m
cable
MA831R
Temperature
probe
SPECIFICATIONS
-2.00
to
16.00
pH
-5.0
to
105.0°C
RESOLUTION
0.01
pH
/
0.1°C
ACCURACY (@25°C)
±0.02 pH / ±0.5°C
TEMPERATURE
Automatic,
COMPENSATION
-5.0
to
105.0°C
CALIBRATION
Automatic,
at
1
or
2
points
pH
ELECTRODE
SE220
(included)
contains batteries. Do not dispose of them
with
other
household
waste.
Hand
them
over to the appropriate collection point for recycling.
Please
note:
proper
product
and
battery
disposal
prevents potential negative consequences for human
health and the environment. For detailed information,
contact your local household waste disposal service
or go to
www.milwaukeeinstruments.com
(USA &
CAN) or
www.milwaukeeinstruments.eu
.
RECOMMENDATION
Before using this product, make sure it is entirely
suitable for your specific application and for the
environment in which it is used. Any modification
introduced by the user to the supplied equipment
may compromise the meter’s performance. For your
and the meter’s safety do not use or store the meter in
hazardous environment. To
avoid
damage or
burn,
do
not perform any measurement in microwave ovens.
WARRANTY
This instrument is warranted against defects in
materials
and
manufacturing
for
a
period
of
2
years
pH/Temperature Meter
TEMPERATURE
PROBE
MA831R
(included)
from
the
date
of
purchase.
Probe
is
warranted
for
6
months.
This
warranty
is
limited
to
repair
or
free
ENVIRONMENT
0
to
50°C;
RH
95%
max.
BATTERY TYPE
1 x 9V alkaline (included)
BATTERY LIFE
approx. 750 hours of use
AUTO-OFF
after 8 minutes of non-use
DIMENSIONS
143
x
80
x
32
mm
WEIGHT
220
g
(with
battery)
of charge replacement if the instrument cannot be
repaired. Damage due to accidents, misuse, tampering
or lack of prescribed maintenance is not covered by
warranty. If service is required, contact your local
Milwaukee Instruments Technical Service. If the repair
is
not
covered by
the
warranty, you will be notified of the
charges incurred. When shipping any meter, make sure
it is properly packaged for complete protection.
Milwaukee Instruments reserves the right to make
improvements in design, construction and appearance
of its products without advance notice.
milwaukeeinstruments.com (USA & CAN)
milwaukeeinstruments.eu
ISTMW102V1
11/21-1
USER MANUAL
To Next Page
Need help?
General
