EasyManua.ls Logo

Milwaukee 2235-20 User Manual

Milwaukee 2235-20
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Cat. No. / No de cat.
2235-20
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
400 AMP CLAMP METER
PINCE AFFICHEUR DE COURANT DE 400 A
MEDIDOR DE PINZA DE 400 A
Question and Answer IconNeed help?

Do you have a question about the Milwaukee 2235-20 and is the answer not in the manual?

Milwaukee 2235-20 Specifications

General IconGeneral
Data holdYes
AC voltage600 V
Resistance (max)400 Ω
Measuring categoryCAT III 600V
AC current maximum resolution (probe)400 A
Battery typeAAA
Battery technologyAlkaline
Clamp opening25.4 mm
Product colorBlack, Red
Weight and Dimensions IconWeight and Dimensions
Depth177.8 mm

Summary

Safety Instructions

General Safety Warnings

Covers DANGER and WARNING statements for safe operation and potential hazards.

FCC Compliance Statement

Details FCC rules for digital devices and potential radio interference.

Clamp Meter Overview

Component Identification

Identifies and describes the main parts and controls of the clamp meter.

Product Specifications

Accuracy and Operating Conditions

Details measurement accuracy, operating temperature, and altitude limits.

Safety Compliance

Lists safety standards and certifications the product adheres to.

Assembly and Preparation

Battery Replacement

Step-by-step instructions for replacing the instrument's batteries.

Probe Tip Sleeves

Instructions for attaching and removing probe tip sleeves for safety.

Operation Guide

Worklight and Backlight Control

How to operate the built-in worklight and display backlight.

Hold Function

Explains how to freeze the displayed reading.

Sleep Mode

Describes the automatic power-off feature to conserve battery.

Over-Range Indication

How the instrument indicates when a measurement exceeds its range.

Maintenance and Care

Tool Maintenance Program

Recommendations for keeping the tool in good repair and calibration.

Cleaning Procedures

Guidelines for cleaning the instrument using mild soap and water.

Related product manuals