Milwaukee 2205-20 User Manual

Cat. No. / No de cat.
2205-20, 2206-20
FORK METERS
T ESTEUR ÉLECTRIQUE À MÂCHOIRES OUVERTES
COMPROBADORES DE CORRIENTE TIPO HORQUILLA
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

Milwaukee 2205-20 Specifications

General

Type	Clamp Meter
Model Number	2205-20
Continuity	Yes
Display	LCD
Memory	No
Auto Shut-off	Yes
Units of Measurement	AC/DC Voltage, AC/DC Current, Resistance
AC Voltage Range	600V
DC Voltage Range	600V

Summary

IMPORTANT SAFETY INSTRUCTIONS

General Safety Precautions

Covers warnings on voltage limits, flammable gases, wet conditions, input limits, grounding, modifications, and PPE.

Battery Handling and Disposal

Guidelines for battery installation, mixing, disposal, and precautions against leakage.

Operating Instructions and Precautions

FUNCTIONS

OPERATION

Preparation Before Use

Measuring AC/DC Voltage

Instructions for measuring AC and DC voltage using V/V mode.

Measuring Low Impedance Voltage

Procedure for measuring AC/DC voltage with low input impedance (Lo-Z).

Measuring AC Current

Procedure for measuring AC current using the jaws.

Measuring Continuity

Procedure for testing continuity of circuits.

Measuring Capacitance

Measuring Resistance

Procedure for measuring electrical resistance.

Measuring Temperature

Non-Contact Voltage Detection

MAINTENANCE

Maintaining the Tool