4
Chapter 3 Introduction of Pallet Stacker
The pallet stacker is driven by electric energy, and the switch on the handle of the handle
controls the walking, and the steering handle controls the steering.
The pallet stacker uses a 24V electronic system with a set of integrated circuit controllers to
adjust its speed steplessly. To ensure a more stable speed and acceleration during driving. The
fork is lifted by an advanced electric hydraulic pump, and the fork is lifted and lowered by the
lifting and lowering buttons.
If the truck is to work in a cold, humid environment, it should be f illed with low temperature oil to
suit the environment.
1 Pal let stacker occasions
Pallet stackers are suitable for stacking goods with pallets.
2 Pallet stacker disabled occasion
2.1 Locations that can cause fire or explosion, such as oil areas.
2.2 Used as a tractor for other stackers.
2.3 Used to transport personnel.
2.4 Work on grass or in the sand.
3 Pal let stacking parameters
Relevant parameters of the forklift are marked on the nameplate.
Model
MBC
Rated capacity kg
1600/2000
Lift height mm
1600~5000
Travel speed without load
km/h
6
Travel speed with full load
km/h
5
Gradeability with full load %
6
Turning radius mm 1490
Overall width mm
820
Service weight（inc.battery）
kg
1300
Drive wheel material
PU
Drive motor (power ) 1.5KW
To Next Page
Loading...