5
4 Main components
4.1 Handle
During the drivin g process, the forklift is controlled to walk and turn by handle, and the maximum
steering angle of the handle is 180 degree. The brake f uncti on is in the stacker of the uppermost or
lowermost end of the handle, and automatically brakes when the power is turned off.
4.2 Pallet Stacker Nameplate
The namep late is attached with the model number; rated lifting weight; maximum lifting height;
self-weight; factory number .
4.3 Cover
Removable, with good visibili ty when use.
4.4 Meter
The power meter displays the power value during normal operation, reflecting whether the battery
power meets the requirements.
4.5 Hydraulic control
The up and down buttons on the body panel control the rise and fall functions.
4.6 Hydraulic device
It consists of pumping station, piping sys tem and lifting cylinder.
4.7 Power socket assembly
When the battery is charging, pull out the socket with the handle and insert it with the plug on the
charger.
4.8 Drive with brake
It is equipped with an electromagnetic energizing brake, a traveling motor, a gear box and a driving
wheel. A steering bearing is arranged between the driving motor and the gear box.
4.9 Speed control device
Normal operation at 24V, the speed is adjusted by electronic control.
4.10 Universal support wheel
One-sided universal wheel support to ensure lateral stability of the stacker body.
4.11 Battery
The battery is fixed in the battery box with a voltage of 24V and a standard capacity of 210Ah.
The stacker assembly
To Next Page
Loading...