Mimaki Europe B.V.
Sign Graphics Products
Specifications
CJV30-60
CJV30-100
CJV30-130 CJV30-160
Maximum print / Cut width
610 mm (24.0") 1,020 mm (40.1") 1,361 mm (53.5") 1,610 mm (63.3")
Print resolution
540 dpi, 720 dpi, 1440 dpi
Print mode
540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi
(Scan x Feed)
720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 720 x 1,440dpi
1,440 x 1,440dpi
Ink
Kind
Exclusive solvent ink: SS21 ink, ES3 ink
Capacity
4-color mode: 440 cc cartridge x 2/color, 880 cc/color
6-color mode: 440 cc cartridge x 1/color, 440 cc/color
Media
Width
620 mm (24.4") 1,030 mm (40.5") 1,371 mm (53.9") 1,620 mm (63.7")
Thickness
Less than 1.0 mm
Roll weight
Less than 25 kg (55 lbs.)
Roll diameter
Inside: 2 inch, 3 inch / Outside: Less than φ180 mm (7.1")
Maximum cutting speed
30 cm: 11.8"/s (42 cm: 1 6.5"/s at the angle of 45)
Cutting force
10-350 g
Applicable tools
Cutter, Water based ball-point pen, Oil based ball-point pen
Media cutting
Cutting in Y direction by cutter on the head
Media heater
Pre/print/post heater
Media take-up device
Roll take-up device (Standard), inside/outside selectable
Command
MRL-III , MGL-IIc2
Interface
USB 2.0
Applicable standard
VCCI class A, FCC class A, UL60950,
CE Marking (EMC directive, low voltage directive),
CB report
Power
AC100V~240V, Less than 1,380VA
Operation environments
20°C~35°C, 35~65%RH (No condensation)
Dimensions
1,524 x 739 x
1,424mm
(76.1" x 29.1" x 56.0") (90.1" x 29.1" x 56.0") (99.9" x 29.1" x 56.0")
Weight
110kg 130kg 145kg 160kg
(242 lbs.) (286 lbs.) (319 lbs.) (352 lbs.)
29
To Next Page
Loading...
