© 2014 MIMAKI ENGINEERING CO.,LTD. 4.2 P.8
4.2 Assembling the Stands and the Device
R.1.0
1
2
3
4
5
6
7
17. Move roll holder to the center of the unit.
18. Check clamp lever is lowered.
When clamp lever is lifted, push it down.
19. Pull out any film that is caught between the C front cover U and
the C front cover M.
Also remove any film from under the cartridge
guide.
INSTALLATION GUIDE > Printer Assembly > Assembling the Stands and the Device
Model
CJV300
Issue
2014.09.01
Revised F/W ver.
1.30
Remark
1.0
To Next Page
Loading...
