Need help?Do you have a question about the Mimomax TORNADO and is the answer not in the manual?
A reliable point-to-point wireless solution for PMR, SCADA, and backhaul applications.
Point-to-multipoint wireless linking for SCADA and Telemetry, supporting many Base Radio Units.
Point-to-point radio system for substation protection and SCADA applications.
Covers modifications, antenna, safety distance, and FCC RF exposure statements.
Addresses cable screening, mains connection, and FCC compliance statements.
Describes connectors, key modules (DPS, Transceiver, Duplexers), and their functions.
Details the DPS, CPU, FPGA, converters, and clock synthesizers.
Explains receiver and transmitter RF/IF sections, local oscillators, and duplexers.
Guides on connecting, configuring IP, and testing network connectivity for setup.
Overview of frequency changes, equipment requirements, and general process steps.
Details using CCMS for changing RF TX and Rx frequencies.
Step-by-step guide for calibrating transmitter power via CCMS.
Guides on duplexer tuning, RSSI, and reference calibration procedures.
Details physical dimensions and various mounting options for the radio unit.
Describes connectors, LEDs, power, serial, Ethernet, and GPIO interfaces.
Covers different styles of system installation for the radio unit.
Lists regulatory compliances for RF bands, EMC, and safety.
To Next Page
General