Mimosa B11 User Manual

B11 User Guide
Mimosa Networks Help Site Tests
Copyright © 2015 Mimosa Page 59
Running a Ping Test
A low level ICMP test which indicates whether the target host is reachable from the local device.
Destination Host - The destination IP Address of the device to ping.
●
Packet Count - The number of packets to transmit during a ping.
●
Packet Size - The size of each packet to transmit during a ping.
●
Run Test - Click on the Run Test button to ping the destination IP address. Results are shown in corresponding
●
table.

Mimosa B11 Specifications

General

Channel Widths	20/40/80 MHz
Ingress Protection	IP67
Antenna Connector	Integrated
Operating Temperature	-30°C to 55°C
Power Method	Passive PoE
MIMO	2x2
Ethernet Ports	1 x 10/100/1000 Mbps
Power Supply	Passive PoE