Minder Research EMGR819LR User Manual

7
GB
Note: If the temperature goes above or below the temperature
measuring range of the main unit or the remote unit ( stated
in specification), the display will show “HHH” or “LLL”.
REMOTE SENSOR SCANNING
The unit can be set to automatically scan and display readings from
the remote sensors. When the remote-sensor mode is active, the
display will show the readings from one channel for about 4-
second and then proceed to the next channel display.
To activate the remote-sensor scanning mode:
• Press and hold CHANNEL for 2-seconds.
Arrow
indicator
Temperature
Trend
Steady FallingRising
To deactivate the remote-sensor scanning mode:
• Press any button.
MAXIMUM AND MINIMUM
TEMPERATURE AND HUMIDITY
The maximum and minimum recorded temperature and humidity
readings will automatically be stored in the memory.
To display the maximum and minimum display memory:
1. Select the channel to be checked.
2. Press MEM/CLEAR once to display the maximum temperature
and humidity and again the minimum temperature and
humidity. The respective indicators, MAX or MIN will be
displayed.
To clear the memory:
• Press and hold MEM/CLEAR for 2-seconds.
If you press MEM/CLEAR now, the maximum and minimum
temperatures and humidity will have the same values as the current
ones until different readings are recorded.
Arrow
indicator
Humidity
Trend
Steady FallingRising

Minder Research EMGR819LR Specifications

General

Brand	Minder Research
Model	EMGR819LR
Category	Measuring Instruments
Language	English