D - 2
D.2 AED Setup
D.3 CPR Setup
Menu Item Description Options/Range Default
Shock Series Sets the number of shocks.
If it is set to greater than one,
the equipment resumes
analyzing the patient’s rhythm
after the shock is delivered to
determine if the shock was
successful. Prompts for shock
counter are provided to guide
you delivering additional
shocks.
1, 2, 3 1
Energy 1 (Adult) Sets the defibrillation energy
level for the first shock on the
adult patient.
100, 150, 170, 200, 300, 360J 200 J
Energy 2 (Adult) Energy 1 ≤ configurable value
≤ Energy 3
Energy 1 to 360J 300 J
Energy 3 (Adult) Energy 2 ≤ configurable value Energy 2 to 360J 360 J
Energy 1 (Pediatric) Sets the defibrillation energy
level for the first shock on the
children.
10, 15, 20, 30, 50, 70, 100J 50 J
Energy 2 (Pediatric) Energy 1 ≤ configurable value
≤ Energy 3
Energy 1 to 100 J 70 J
Energy 3 (Pediatric) Energy 2 ≤ configurable value Energy 2 to 100 J 100 J
Initial CPR Selects whether the
equipment enters the CPR
status directly after turned on.
On, Off Off
ECG Display Selects whether the ECG
waveform is displayed.
On, Off Off
Auto Release Time Sets the time the equipment
automatically removes the
stored energy internally.
30s, 60s, 90s, 120s 30s
Menu Item Description Options/Range Default
CPR Mode (Adult) Sets the rate of compression
and ventilation.
30:2, 15:2, Hands-Only 30:2
CPR Mode (Pediatric) 15:2
CPR Voice Prompts Selects whether voice prompts
are provided when using a CPR
metronome.
On, Off On
To Next Page
Loading...
Need help?
General
