Foreword 1
Reagents, Calibrators and Controls
CAUTION
Use appropriate reagents, calibrators and controls on the system.
Select appropriate reagents according to performance characteristic of
the system. Consult the reagent suppliers, our company or our
authorized distributor for details, if you are not sure about your reagent
choice.
Store and use reagents, calibrators and controls strictly as instructed
by the suppliers. Otherwise, you may not obtain reliable results or best
performance of the system.
Improper storage of reagents, calibrators and controls may lead to
unreliable results and bad performance of the system even in validity
period.
Perform a calibration and quality control after changing reagents.
Otherwise, you may not obtain reliable results.
Carryover among reagents may lead to unreliable test results. Consult
the reagent manufacturer or distributor for details.
Setting up the System
CAUTION
To define such parameters as sample volume, reagent volume and
wavelength, follow the instructions in this manual and the package
insert of the reagents.
Backing up Data
NOTE
The system can automatically store data to the built-in hard disk of the
PC. However, data loss is still possible due to mis-deletion or physical
damage of the hard disk. We recommend you to regularly back up the
data to portable storage device.
Computer and Printer
NOTE
Refer to the operation manuals of computer and printer for details.
To Next Page
Loading...
Need help?
General
