Need help?Do you have a question about the Mindray BS-180 and is the answer not in the manual?
General| Sample Type | Serum, Plasma, Urine, CSF |
|---|---|
| Throughput | Up to 180 tests/hour |
| Display | LCD Touchscreen |
| Analysis Method | Photometric, Turbidimetric |
| Reaction Volume | 180-500 µL |
| Reaction Temperature | 37°C |
| Light Source | Halogen Lamp |
| Photometric Range | 0-3.0 Abs |
| Data Storage | Up to 50, 000 results |
| Measurement Principle | Absorbance photometry |
| Measurement Wavelength Range | 340-670 nm |
| Type | Clinical Chemistry Analyzer |
| Sample Volume | 2-35 µL |
| Connectivity | USB, RS-232, Ethernet |
| Sample Tray | 40 positions |
| Reagent Tray | 40 positions |
| Reaction Tray | 80 cuvettes |
| Wavelength | 340 nm, 405 nm, 510 nm, 546 nm, 578 nm, 630 nm |
| Control Software | Windows-based |
| Power Supply | AC 100~240V, 50/60Hz |
| Operating Environment Temperature | 15-30°C |
| Operating Environment Humidity | 35% ~ 85% |
Instructions to prevent electric shock hazards during operation.
Warns about hazards from moving components and provides safety guidelines.
Details instructions to protect against biohazardous infections.
Defines the proper application and purpose of the chemistry analyzer.
Specifies that only trained professionals should operate the analyzer.
Specifies the necessary environmental conditions for system installation.
Lists tools, wash solutions, and disinfectants needed for maintenance.
Outlines routine daily maintenance tasks for the analyzer.
Classifies error messages based on severity and provides general troubleshooting advice.
To Next Page
