Need help?Do you have a question about the Mindray BC-2800 and is the answer not in the manual?
General| Reagents | Diluent, Lyse, Cleaner |
|---|---|
| Power Supply | AC 100-240 V, 50/60 Hz |
| Power Consumption | ≤150 VA |
| Printer | Built-in thermal printer |
| Type | Hematology Analyzer |
| Parameters | WBC, RBC, HGB, HCT, PLT |
| Sample Volume | 20 μL |
| Display | Large LCD display |
| Data Storage | 10, 000 sample results |
| Interface | RS232, USB |
| Operating Environment | Temperature: 15-30°C, Humidity: 30-85% |
| Storage Environment | Temperature: -10-55°C, Humidity: ≤93% |
Provides an overview of the hardware components and their functions.
Explains the power distribution and sources for the CPU board.
Details the Real-Time Clock arrangement and its function.
Describes the CPU and its associated peripheral components.
Explains the analog signal processing for blood cell counts and system monitoring.
Details the digital interfaces, including serial ports, parallel ports, and GPIOs.
Describes the function and components of the driving board.
Explains the function and connection schematic of the display unit adapter.
Details the functions of the keypad adapter, including scanning and control.
Outlines the primary functions of the fluidic system.
Lists error codes and their corresponding error messages for diagnosis.
Provides solutions and corrective actions for identified errors.
Solution for errors related to abnormal environmental temperature.
Solution for errors when WBC count time is less than preset.
Solution for errors when RBC count time is less than preset.
Solution for communication setting discrepancies.
Solution for printer connection problems.
Solution for the recorder's press bar being up.
Solution for issues with the vacuum chamber filter.
To Next Page
