Mindray BC-2800 - 2.2 Fluidic System Construction

Fluidic System
2.2 Construction of Fluidic System
The fluidic system consists of a sample probe assembly, syringe assembly, pump
assembly, volumetric metering unit, right valve panel and front panel.
2.2.1 Sample Probe Assembly
No. Name
1 Rotation motor
2 Probe wipe
3 Probe holder
4 Sample probe
5 Elevator motor
6 Upper photo-coupler
7 Sleeve
8
Left and right
photo-couplers
9 Retaining ring
Figure 2-1 Sample probe assembly
10 Mount
2.2.2 Syringe assembly
2.2.3 Pump Assembly
2.2.4 Volumetric metering unit
2.2.5 Right valve panel and front panel
See Chapter 3 Disassembling Instructions.
2-2 BC-2800 Auto Hematology Analyzer (V1.0)