Chapter 6 Maintenance
6.1 Regular Maintenance
To keep this analyzer in a good shape, regular maintenance is demanded.
6.1.1 Special Notes
The parts in contact with blood are potentially infectious. Be sure to wear
standard laboratory attire (including rubber gloves) when maintaining or
operating this analyzer and wash your hands with detergent when you are
done.
Be sure to keep you hair, clothes, cuff or hands away from the moving parts of
this analyzer.
Be sure to use specified tools or parts to maintain this analyzer and be sure to
clean the used tools as instructed by their instruction manual when you are
done.
Be sure to use soft and clean cloth, or neutral detergent-soaked cloth (twisted
dry), or soft cloth washed by ethanol to clean the surface of this analyzer.
Be sure to pay attention to the marks or symbols on this analyzer. Be sure not to
touch the power plug at the back of this analyzer with wet hands or wet rags.
Be sure not use organic solvent or acid/alkaline detergent to wash the surface of
this analyzer. Otherwise, the surface may fade or become corrupted.
Be sure to avoid direct contact with the reagents that will hurt your eyes, skin and
diaphragm. In case you spill the reagents on you skin, be sure to wash them off
with much water. In case you spill the reagents into your eyes, be sure to
immediately wash your eyes with much water and go see a doctor for further
treatment.
BC-2800 Auto Hematology Analyzer (V1.0) 6-2
To Next Page
Loading...
