Mindray BS-180 - Test and Maintenance Software; 8.1 Basic Operations

8 Test and Maintenance Software 8-1
8 Test and Maintenance
Software
8.1 Basic Operations
8.1.1 Installation
It is not necessary to install the test and maintenance software. Just copy the
software files to the PC and click the NewDebug.exe icon to start the program.
Parameters can be downloaded automatically when software is running. The
communication frame is shown on the system interface when downloading the
parameters. After downloading finished, you can use the functions of the software.
The product number of the test and maintenance software is G-BA10-30-78244 for
BS-120/BS-130 and G-110-000519-00 for BS-180/BS-190.
8.1.2 Overview
8.1.2.1 Screen Layout
The main screen of the test and maintenance software consists of two parts. See
Figure 8-1.