Foreword 5
Preventing Personal Injury Caused by Photometer Lamp
Please observe the following instructions to prevent personal injury caused by
photometer lamp.
WARNING
Light sent by the photometer lamp may hurt your eyes. Do not stare
into the lamp when the system is in operation.
If you want to replace the photometer lamp, first switch off the Main
Power and then wait at least 15 minutes for the lamp to cool down
before touching it. Do not touch the lamp before it cools down, or you
may get burned.
Preventing Infection
Please observe the following instructions to protect against the biohazardous
infection.
BIOHAZARD
Inappropriately handling samples, controls and calibrators may lead to
biohazardous infection. Do not touch the sample, mixture or waste
with your hands. Wear gloves and lab coat and, if necessary, goggles.
In case your skin contacts the sample, control or calibrator, follow
standard laboratory safety procedure and consult a doctor.
Handling Reagents and Wash Solution
Please observe the following instructions to protect against the chemical hazard.
WARNING
Reagents and wash solution may hurt human skins. Exercise caution
when using the reagents and wash solution. In case your skin or
clothes contact them, wash them off with soap and clean water. In
case the reagents or wash solution spill into your eyes, rinse them
with much water and consult an oculist.
To Next Page
Loading...
Need help?
General
