Mindray BS-200 User Manual

Preface
6
Precautions on Use
To use the BS-200 Chemistry Analyzer safely and efficiently, please pay attention to
the following operation notes.
Intended Use
WARNING:
The BS-200 Chemistry Analyzer is a chemistry system that is designed
for the in vitro quantitative determination of clinical chemistries in
serum, plasma, urine or CSF samples. Please consult Mindray first if
you want to use the system for other purposes.
To draw a clinical conclusion, please also refer to the patient’s clinical
symptoms and other test results.
Operator
WARNING:
The BS-200 Chemistry Analyzer is to be operated only by medical
professionals trained and authorized by Mindray or Mindray-authorized
distributors.
Environment
CAUTION:
Please install and operate the system in an environment specified by
this manual. Installing and operating the system in other environment
may lead to unreliable results and even equipment damage.
To relocate the system, please contact Mindray Service Department or
your local distributor.
Preventing Interference by Electromagnetic Noise
CAUTION:
Electromagnetic noise may interfere with operations of the system. Do
not install devices generating excessive electromagnetic noise around
the system. Do not use such devices as mobile phones or radio
transmitters in the room housing the system. Do not use other CRT
displays around the system.
Do not use other medical instruments around the system that may
generate electromagnetic noise to interfere with their operations.

Mindray BS-200 Specifications

General

Throughput	200 tests/hour
Wavelength Range	340-800 nm
Light Source	Halogen lamp
Absorbance Range	0-3.0 Abs
Measurement Principle	Photometric
Sample Capacity	40 positions
Reagent Capacity	40 positions
Reagent Positions	40 positions
Sample Positions	40 positions
Sample Volume	2-35 μL
Operating System	Windows-based
Power Requirements	AC 110-220V, 50/60 Hz
Reagent Volume	20 ~ 350 μL
Assay Types	Endpoint, Kinetic, Fixed-time