Mindray BS-200 - System Setup and Data Management; Setting up the System; Backing up System Data

Preface
9
Setting up the System
CAUTION:
To define such parameters as sample volume, reagent volume and
wavelength, follow the instructions in this manual and the instructions
of reagents.
Backing up Data
NOTE:
The system automatically stores the data to the built-in hard disk.
However, data loss is still possible due to mis-deletion or physical
damage of the hard disk. Mindray recommends you to regularly back
up the data to such medium as CDs.
Computer and Printer
NOTE:
Refer to their operation manuals for details.
External Equipment
WARNING:
External equipment connected to the system, such as PC and printer,
shall be consistent with IEC 60950 or EN 60950.