Mindray DPM 6 - Parameter Colors; Default (Preset) Settings

P/N: 046-003757-00 Rev A
Quick Reference Guide
19
PARAMETER COLORS
The DPM 6 or DPM 7 bedside monitor provides the ability to adjust the
parameter’s numeric and waveform (if applicable) color.
To adjust the parameter’s color on the DPM 6 or DPM 7 bedside monitor:
a. Select Main Menu
(quick key)
b. Select Screen Setup>>
c. Select Measurement Color Setup
d. Select parameter
e. Select color
f. Select Main Menu
(quick key) or to return to the main display
Panorama® Central Station Interface: Parameter color on the DPM 6 or
DPM 7 monitor, Panorama® Central Station, ViewStation, and WorkStation are
independent.
DEFAULT (PRESET) SETTINGS
The DPM 6 and DPM 7 settings are automatically restored either when the
patient size is adjusted or when Discharge is performed.
A clinician may restore default settings on a patient currently being monitored
on the DPM 6 or DPM 7 bedside monitor by:
a. Select Main Menu
(quick key)
b. Select Defaults >>
c. Select default (preset) configuration from displayed list
d. Select OK
e. Select Yes to confirm and return to the main display