Need help?Do you have a question about the Mindray iPM Series and is the answer not in the manual?
General| Resolution | 800 x 600 pixels |
|---|---|
| Touchscreen | Yes |
| Display Type | TFT LCD |
| NIBP | Yes |
| SpO2 | Yes |
| Temperature | Yes |
| Respiration | Yes |
| Battery Life | 4 hours |
| ECG | Yes |
| Pulse Rate | Yes |
| Battery Type | Rechargeable Lithium-ion |
| Power Supply | AC 100-240V, 50/60Hz |
Describes the function and location of components on the front panel of the iPM series patient monitor.
Details the components visible on the side view of the iPM 12 patient monitor.
Details the components visible on the side view of the iPM 10 and iPM 8 patient monitors.
Lists and describes connectors and ports on the rear panel of the iPM 12/iPM 10.
Lists and describes connectors and ports on the rear panel of the iPM 8 patient monitor.
Explains the key areas and numbered elements of the patient monitor's screen interface.
Provides steps for safely powering on the patient monitor and connecting it to a power source.
Outlines the initial steps required to begin patient monitoring procedures.
Details the procedure for safely shutting down and disconnecting the patient monitor.
Guides on using, enabling/disabling, and calibrating the touchscreen interface.
Covers changing monitor language and adjusting screen brightness for optimal viewing.
Explains how to configure the system date, time, and their formats.
Details how to adjust alarm volumes, including general, key, and QRS tones.
Guides on customizing the display by allocating positions for parameters and waveforms.
Lists approved cleaning agents and provides step-by-step instructions for cleaning the equipment.
To Next Page