Minebea Intec MiNexx-link-E PR 5215/10 - Error Numbers @ LAST_ERROR

11. Error messages | 11.2 - Error numbers @ "LAST_ERROR" | 134
11.2 Error numbers @ "LAST_ERROR"
11.2.1 Weighing point error
Number Display Cause
6 test active Test is active, no weights.
7 cal active Adjustment is active, no weights.
8 no standstill No standstill of the scale.
13 tare is active Tare is active.
16 weight has error Weight error.
18 cannot tare below
zero
Taring below zero is not possible.
142 cal active During adjustment, taring and zeroing is
not possible.
147 no zeroset Zeroset outside of the zero setting range
is not possible.