Minebea Intec Mini FLEX - Mini FLEXLOCK Mounting Kits PR 6012;31 N and PR 6012;31 S

4.1.2 Mini FLEXLOCK mounting kits PR 6012/31N and PR 6012/31S
No. Description
1 Auxiliary mounting plate
2 Upper plate
3 Constrainer with joint head (2×), screwed joint, nut (2×), joint pin (2×), and lo-
cking washer (2×)
4 Screw (2×), spring washer (2×), and washer (2×) for the equipotential bonding
cable (supplied with the load cell)
5 Lower plate
6 Quick guide (not shown)
Mini FLEX and Mini FLEXLOCK mounting kits PR 6012/01, ../31, ../41 4 Specications
EN-10 Minebea Intec