122
Address Data name
57941～57492 CF-43 THIRD RANGE SCALE INTERVAL SETTING
57943～57944 CF-44 THIRD RANGE BOUNDARY SETTING
57945～57992 UNUSED
57995～57996 CF-70 ANALOG OUTPUT TARGET
57997～57998 CF-71 DISPLAY VALUE FOR ANALOG OUTPUT OF 4 mA DC (0 V DC)
57999～58000 CF-72 DISPLAY VALUE FOR ANALOG OUTPUT OF 20 mA DC (10 V DC)
58001～58034 UNUSED
58035～58036 CF-90 CALIBRATION DATA SCALE INTERVAL (Reference use)
58037～58038 CF-91 CALIBRATION DATA WEIGHING CAPACIT
(Reference use)
58039～58040 CF-92 CALIBRATION DATA WEIGHT (Reference use)
58041～58042 CF-93 CALIBRATION ZERO mV/V VALUE (Reference use)
58043～58044 CF-94 CALIBRATION SPAN mV/V VALUE (Reference use)
58045～58048 UNUSED
58049～58050 CF-97 STABILITY DETECTION TIME WIDTH DURING CALIBRATION
58051～58368 UNUSED
58369～58370 SQF-01 MEASUREMENT MODE
58371～58372 SQF-02 CONTROL MODE
58373～58376 UNUSED
58377～58378 SQF-05 COMPARISON SIGNAL OPERATION
58379～58380 SQF-06 NEAR ZERO COMPARISON OPERATION
58381～58382 SQF-07 FULL COMPARISON OPERATION
58383～58386 UNUSED
58387～58388 SQF-10 MEASUREMENT TIME MONITORING TIMER
58389～58396 UNUSED
58397～58398 SQF-15 EFFECTIVE OVER NEAR ZERO AT FLOW START
58399～58400 SQF-16 AUTOMATIC TARE AT FLOW START
58401～58402 SQF-17 WAITING TIME FOR FLOW START
58403～58404 SQF-18 AUTOMATIC TARE AFTER WAITING FLOW START
58405～58406 UNUSED
58407～58408 SQF-20 FULL FLOW COMPARISON PROHIBITED TIME
58409～58410 SQF-21 MEDIUM FLOW COMPARISON PROHIBITED TIME
58411～58412 SQF-22 DRIBBLE FLOW COMPARISON PROHIBITED TIME
58413～58414 UNUSED
58415～58416 SQF-24 FLOW/DISCHARGE BRAND SETTING TARGET
58417～58418 SQF-25 AUTOMATIC FREE FALL COMPENSATION OPERATION
58419～58420 SQF-26 AUTOMATIC FREE FALL COMPENSATION VALIDITY WIDTH
58421～58422 SQF-27 AUTOMATIC FREE FALL SAVE
58423～58426 UNUSED
58427～58428 SQF-23 JUDGE CONDITION
58429～58430 SQF-31 WAITING TIME FOR JUDGE
58431～58436 UNUSED
58437～58438 SQF-35 MAXIMUM NUMBER OF COMPENSATION FLOW TIMES
58439～58440 SQF-36 JUDGE CONDITION AFTER COMPENSATION FLOW
58441～58442 SQF-37 COMPENSATION FLOW TIME
58443～58444 SQF-38 WAITING TIME FOR JUDGE AFTER COMPENSATION FLOW
58445～58446 UNUSED
58447～58448 SQF-40 BATCH FINISH OUTPUT TIME
58449～58450 SQF-41 BATCH FINISH OUTPUT OFF CONDITION
58451～58456 UNUSED
58457～58458 SQF-45 DISCHARGE START ON BATCH FINISH
58459～58460 SQF-46 DISCHARGE TIME MONITORING TIMER
58461～58462 SQF-47 WAITING TIME FOR DISCHARGE GATE CLOSE
58463～58464 SQF-48 DISCHARGE FINISH OUTPUT TIME
58465～58466 SQF-49 TARE CLEAR ON DISCHARGE FINISH
To Next Page
Loading...
