Minebea CSD-815B-73 - User Manual

Digital indicator with CC−Link interface
CSD−815B−73
MINEBEA Co., Ltd.
INSTRUCTION MANUAL
EN294−1435
Note : Please read this Instruction Manual carefully before use.
Be sure to follow the items that require attention described in the manual.
Keep the manual at hand so that you can pick it up and read it as soon as
necessity requires.

Summary

Interface Point Identification

Rear Panel CC-Link I;F Point

Status Indicators

Connection Methods

Connector Pin Configuration

CC-Link Connection Settings

Station Number Setting (F-84)

Explains the setting of the station number for CC-Link.

Station Selection (F-85)

Details how to select and set the station number for communication.

Baud Rate Setting (F-86)

Explains how to configure the communication baud rate.

32-bit Data Expression (F-87)

Describes the configuration for 32-bit data expression.

PLC Memory and Addressing

Address Allocation

Explains I/O and register allocation based on occupied stations.

Address Map Overview

Data Detail (Master to Instrument)

Commands List

Remote Register (Instrument to Master)

Relay Zone Mapping

Remote Output (Master to Instrument)

Operation Methods

Writing Set Values (Special Data Area)

Explains writing set values into the special data area.

Writing;Reading by General Command

Details writing and reading data using general commands.

Shifting to Communicable Status

CPU Normal Operation Signal

Interface Specifications

CC-Link Interface Specifications

Minebea CSD-815B-73 Specifications

General

Brand	Minebea
Model	CSD-815B-73
Category	Touch Panel
Language	English