Minelab EQUINOX 900 - Page 2

3
4
5
6
7
2
1
USB A
USB
MICRO B
USB-AUSB-C
3
4
5
6
7
21
TIGHTEN CAMLOCKS
Tighten the Camlocks if they slip or become loose.
Charge Status LED
Tracking Ground Balance Indicator
Wireless Audio Indicator
Headphones Indicator
Open CloseTighten gently in
increments
Vibration Indicator
Beach Overload Indicator
Battery Level/Charging
User Profile*
Depth Gauge
Pinpoint Indicator
Settings
Short press: Scroll to next setting
Advanced Settings
Long press: Toggle Advanced Setting
Sensitivity and Settings Adjust
(Minus/Plus)
Accept/
Reject
Frequency
ASSEMBLY CHARGING
Power
Backlight
Discrimination Scale
Short press: Backlight
Long press: Flashlight
Sensitivity Level
Frequency Display
Search Modes
All Metal
Pinpoint/Detect
Flashlight
CONTROLS & DISPLAY
Target Identification Number
Search Mode
Tone Volume
Threshold Pitch*
Tone Pitch
Tone Break
Iron Bias
Short Press: Wireless Audio On/Off
Long Press: Wireless Audio Pairing
Noise Cancel
Ground Balance
Volume Adjust
Threshold Level
Target Tone
Accept/Reject
Recovery Speed
Check and repeat
if needed
Charge your detector with a good-quality USB charger that has
a minimum charging capacity of 2 A @ 5 V.
Risk of USB charger failure if a low quality charger is used.
Look for the following marks on USB chargers:
5–6 HOURS
3 HOURS
EQUINOX 900 Only