Minelab EXPLORER II - Page 85

THE MINELAB EXPLORER II
85
ADVANCED USE
6
Audio 2
This setting is similar to Audio 1, with the addition of some filtering
of the audio tone response. Audio 2 reduces the variability of the
pitch, offering a smoother continuous sound.
Audio 3
This setting is similar to Audio 2, with increased filtering of the
audio tone response. This offers more consistent tone for a single
target, but for multiple targets the tones will ‘blend’.
NOTE It is recommended you experiment with these settings
once you are familiar with the sounds produced by the
Explorer II in the Normal Response setting, then choose
according to conditions and preference.
OPTIONS : RESPONSE