Three
LESSON 1 – GENERAL DESCRIPTION & PREPARATION
Aim. Correctly describe and identify the F3 and prepare it for use.
Classroom Instruction. The training aids required are:
Chalk board or white board
Computer Projector
F3 Operations Manual
F3 Operator Training PowerPoint presentation
One F3 inside a Hard Case and one F3 in its soft Carry Bag
F3 detectors - one per two students (including Hard Case)
The major teaching points of this lesson are as follows:
Safety
Equipment Specifications
Description of Main Components
F3 Preparation
Three
TEACHING POINTS
Safety. Emphasize the need to become very familiar with the equipment and
the need to be able to identify all parts. Relate this to safety issues during the
demining process. All components should be checked for correct operation
before operating the equipment. If a fault develops, an operator must be able to
correctly name the part of the detector that is at fault. Explain the importance of
the Test Piece.
Four
Equipment Specifications. List the basic specifications. Explain that the
entire detector is waterproof to IP67. Explain the need to use good quality
alkaline batteries and not carbon batteries. When using rechargeable batteries,
they should have a minimum capacity of 3Ah (3,000mAh), batteries with a
capacity of 4.5Ah (4,500mAh) are recommended.
To Next Page
Loading...
Need help?
General
