▷ Daytime running lights: press together
the upper and lower locking of the bulb
holder, arrow 2, and remove the bulb
holder.
For better accessibility, remove the bulb
of the fog lamp as needed.
▷ Fog lamps: turn the bulb holder, ar‐
row 3, counter-clockwise and remove.
5. Pull the bulb out of the fixture.
6. Insert the new bulb and install the cover in
the reverse order.
The daytime running lights bulb holder en‐
gages audibly, first below, then above.
Tail lamps, bulb replacement
Overview
Vehicles with a rear fog lamp
1 Side tail lamps
2 Rear fog lamp
3 License plate lamp
4 Center brake lamp
Vehicle with two rear fog lights
1 Side tail lamps
2 Rear fog lights
3 License plate lamp
4 Center brake lamp
Side tail lamps
1 Brake lights/tail lamps
2 Turn signal
3 Reversing lights
Side LED tail lights
1 Tail lamps
2 Turn signal
Seite 212
MOBILITY
Replacing components
212
Online Edition for Part no. 01 40 2 969 276 - II/16
To Next Page
Loading...
