3 Brake light
4 Reversing lights
Side tail lamps
Follow the general instructions on lights and
bulbs, refer to page 209.
Bulbs: P21W
1. Open tailgate, refer to page 41.
2. Remove left or right cover.
3. Through the opening, loosen the plug con‐
nector, arrow 2 on the bulb holder.
Press the latches together, arrows 1, and
remove the bulb holder.
4. Remove the bulb holder from the opening.
5. Press the nonworking bulb gently into the
socket, turn counterclockwise and remove.
▷ Arrow 1: brake lights/tail lamps
▷ Arrow 2: turn signal
▷ Arrow 3: reversing light
6. Proceed in the reverse order to insert the
new bulb and attach the bulb holder. Make
sure that the bulb holder engages in all fas‐
teners.
Central brake lamp and license plate
lamp
Follow the general instructions on lights and
bulbs, refer to page 209.
The lights feature LED technology. In the case
of a malfunction, contact a dealer’s service cen‐
ter or another qualified service center or repair
shop.
Vehicles with a rear fog lamp
Follow the general instructions on lights and
bulbs, refer to page 209.
Bulbs: W16W
1.
On vehicles with heat shield:
Loosen 3 screws, arrow.
2. Push the heat shield forward and the
bumper back in order to be able to reach
the fog lamp.
Seite 213
Replacing components
MOBILITY
213
Online Edition for Part no. 01 40 2 969 276 - II/16
To Next Page
Loading...
