How to fix 'insufficient memory' error on Minolta Scanner?
If the 'insufficient-memory' message appears while using the Minolta Scanner, increase the memory requirements for the host application. If multiple images have been scanned, close and relaunch the host application.
Why is the lamp blinking rapidly on Minolta Scanner?
If the scanner indicator lamp on your Minolta Scanner blinks rapidly, it may be because the scanner door was opened during setup. Close the door, and shut down and restart the scanner and DiMAGE Scan Utility.
What does 'set holder' message mean on Minolta DIMAGE SCAN ELITE 5400?
If the 'set-holder' message appears on your Minolta Scanner, reload the holder into the scanner.
How to resolve 'holder does not match selected film' on Minolta DIMAGE SCAN ELITE 5400 Scanner?
If the 'holder-does-not-match-selected-film' message appears on your Minolta Scanner, set the correct film format in the DiMAGE Scan Utility or insert the correct holder into the scanner.
How to fix 'could not confirm scanner connection' message on Minolta Scanner?
If the 'could-not-confirm-scanner-connection' message appears when starting the Minolta Scanner utility software, ensure the cable is securely connected between the computer and the scanner. Then, turn the scanner off and on, and click OK to continue.
General| Maximum Resolution | 5400 dpi |
|---|---|
| Interface | USB 2.0 |
| Scanner Type | Film Scanner |
| Film Compatibility | 35mm |
| Scanning Resolution | 5400 dpi |
| Optical Resolution | 5400 dpi |
| Bit Depth | 16 bit |
| Scanning Method | CCD |
| Film Formats Supported | 35mm film |
| Weight | 4.4 lbs |
| Dynamic Range | 4.8 D |
Provides essential safety guidelines and precautions for operating the Minolta DiMAGE Scan Elite 5400, focusing on electrical hazards and product integrity.
Details environmental and handling conditions to avoid, such as humidity, dust, and extreme temperatures, to prevent damage or injury.
Guidance on prerequisites for connecting the scanner to a computer, emphasizing software installation first.
Step-by-step instructions for securely connecting the scanner to a computer using a USB cable.
Detailed steps for connecting the scanner to a computer via the IEEE 1394 (FireWire) interface.
Instructions for connecting the scanner's AC adapter to the unit and a power outlet.
To Next Page
