Minolta MAXXUM 3xi - Page 18

(Film)
1. Open the back cover by sliding the
back-cover release downward.
2. Place the film cartridge into the
film chamber and extend the leader
between the guide rails until the tip
is just past the film-leader index.
WRONG
• NEVER TOUCH THE SHUTTER CURTAIN WITH YOUR FINGERS OR
WITH THE FILM TIP. Its precision design makes it extremely sensitive to
pressure.
• If the film leader is torn or crimped, it may not wind properly.
• If the film tip extends beyond the mark, gently push the excess back into the
cartridge.
^ NEXT PAGE
16