3.5.2.2 Taking Photos Remotely
1. To take a photo, press the capture button at the bottom of your
smartphone screen. When a photo is taken, the operating indicator
light at the back of the camcorder will flash red twice.
2. The photo resolution can be changed on the app. Press the button at
the far right of your smartphone screen to bring up the photo resolution
sub menu. Photo resolution can be set at 24MP, 20MP, 16MP, 12MP,
10MP, 8MP, 7MP, 5MP, 3MP, 2MP.
3. Self timer can also be adjusted on the app and can be set to Off, 2S
and 10S. Once 2S or 10S is selected, press the capture button. A
countdown timer will appear on the camcorder screen to signal the
countdown.
To Next Page
Loading...
