Minolta MND50 - Page 31

3. Using Your Camera
30
MODE/OK button to enter the Date & Time Set menu.
5.
Press the UP or DOWN buttons to change the value of the highlighted
field.
6.
Press the LEFT or RIGHT buttons to change to the next field.
7.
Press the MODE/OK button to save the date and time and to exit the
settings menu.
8.
You can also press the MENU button to exit the settings menu without
making a selection.
3.2.19 Format Memory Card
The format setting erases all photos, videos and data stored on your
memory card.
1.
In Interval Photo Mode press the MENU button.
2.
Select the gear icon on the bottom of the left side of the screen using the
UP or DOWN buttons.
3.
Press the RIGHT button to enter the setup menu.
4.
Select Format Memory Card using the UP or DOWN buttons and press
the MODE/OK button to enter the Format Memory Card menu.
5.
Press the LEFT or RIGHT buttons to navigate the menu, and press the
MODE/OK button to confirm your selected option (Format, Cancel).
6.
Press the MENU button to exit the settings menu without making a
selection.
NOTE: This will delete all of your media and cannot be undone.
3.2.20 Device Info
This setting displays the current firmware version of your camera.
1.
In Interval Photo Mode press the MENU button.
2.
Select the gear icon on the bottom of the left side of the screen using the
UP or DOWN buttons.
3.
Press the RIGHT button to enter the setup menu.
4.
Select using the UP or DOWN buttons and press the
MODE/OK button to enter the Device Info menu.
5.
Press the OK button to exit the Device Info menu.
3.2.21 Restore Default Settings
Factory default settings can be restored in this menu. This function will not
delete the media stored on the memory card, and will only restore all of the
1.
In Interval Photo Mode press the MENU button.
2.
Select the gear icon on the bottom of the left side of the screen using the
UP or DOWN buttons.