enter the ‘Flash’ menu.
3.
Use the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (Auto, Off, On).
4.
Press the MODE button to exit the settings menu without making a
selection.
3.7.9
ISO
This function adjusts the light sensitivity in your photograph.
1.
In Loop Recording Mode press the MENU button.
2.
Select ‘ISO’ using the UP or DOWN buttons and press the OK button to
enter the ‘ISO’ menu.
3.
Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (ISO Auto, 100, 200, 400, 800,
1600, 3200, 6400).
4.
Press the MODE button to exit the settings menu without making a
selection.
3.7.10
Time Stamp
This setting allows you to imprint a date & time onto your recorded video
files. Once a video file is recorded with the imprint, the imprint cannot be
removed.
1.
In Loop Recording Mode press the MENU button.
2.
Select ‘Time Stamp’ using the UP or DOWN buttons and press the OK
button to turn the time stamp on or off. When On, a check mark will be
shown.
3.7.11
Record Audio
This function allows you to turn audio recording in video and loop recording
modes on and off. If this setting is set to off, any videos recorded in video
and loop recording modes will not have any audio.
1.
In Loop Recording Mode press the MENU button.
2.
Select ‘Time Stamp’ using the UP or DOWN buttons and press the OK
button to turn the time stamp on or off. When On, a check mark will be
shown.
To Next Page
Loading...
