base the exposure setting on a very small area of the scene. Center metering
will use the light from the center of the LCD and the Multi setting measures the
light at several points on the screen.
1.
In Loop Recording Mode press the MENU button.
2.
Select ‘Metering’ using the UP or DOWN buttons and press the OK button
to enter the ‘Metering’ menu.
3.
Use the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (Multi, Center, Spot, Matrix).
4.
Press the MODE button to exit the settings menu without making a
selection.
3.7.6
Sharpness
This function adjusts the visible detail of a photograph.
1.
In Loop Recording Mode press the MENU button.
2.
Select ‘Sharpness’ using the UP or DOWN buttons and press the OK
button to enter the ‘Sharpness’ menu.
3.
Use the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (Sharp, Normal, Soft).
4.
Press the MODE button to exit the settings menu without making a
selection.
3.7.7
Video Quality
The Image Quality function determines the level of compression the camera
uses when saving photos to a memory card.
1. In Loop Recording Mode press the MENU button.
2. Select ‘Video Quality’ using the UP or DOWN buttons and press the OK
button to enter the ‘Video Quality’ menu.
3. Use the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (Super Fine, Fine, Normal).
4. Press the MODE button to exit the settings menu without making a
selection.
3.7.8
Flash
This function allows to change the flash settings.
1.
In Loop Recording Mode press the MENU button.
2.
Select ‘Flash’ using the UP or DOWN buttons and press the OK button to
To Next Page
Loading...
