Minolta ProShot MN67Z - Connecting to a Pictbridge Compatible Printer; Setting the USB Mode

108
3. Press the [ ]/[ ] button to
select [USB] and press the button to
enter the menu.
4. Press the [
]/[ ] button
to select [Printer] and press the
button to confirm.
USB
TV-System
Printer
NTSC
HDMI CEC Control
Off
Exit
Set
Select
USB
TV-
S
ystem
P
r
i
nte
r
N
T
SC
H
DMI CEC Contro
l
O
f
f
E
xi
t
S
e
t
Se
l
ect
USB
PC
Printer
After the camera is reset, it will
switch to PC mode automatically
from USB mode.
See “Using the PictBridge Menu“
section on page 110.
PictBridge technology allows printing on
the photos saved in the memory card by
a printer.
To find out if a printer is PictBridge
compatible, simply look for the PictBridge
logo on the packaging or check the
owner's manual for specifications. With
the PictBridge function on your camera,
you can print the captured photos directly
to a PictBridge compatible printer using
the supplied Micro USB cable, without the
need for a PC.
Setting the USB Mode
The camera’s Micro USB port can be set
to connect with either a PC or a printer.
The following steps will ensure that the
camera is correctly configured to connect
with a compatible printer.
1. Press the
button, press the [ ]
/[
] button to select and
press the button to enter the menu.
2. Press the [
]/[ ] button to select
.
Connecting to a PictBridge Compatible Printer