47
Custom Settings ( )
The user can store frequently used
shooting modes; and parameters and
switch to this mode for a quick adjustment.
Settings under
mode (unset state or
state after reset):
1. Turn the Mode dial to select the
mode, and enter the setup screen, as
shown in the figure below:
Select one capture mode to define CS.
Auto Mode
Confirm
Exit
2. As shown in the figure above, press the
[
]/[ ] button to select a capture
mode that you want to define as ,
and press the
button to enter the
shooting screen.
3. As shown in the figure, press the
button, and choose whether to continue
the
mode setting or rotate the Mode
dial to skip.
Or
Go to setting CS mode
Rotate the mode dial to skip.
Yes
For setting under other modes (use this
method to select a different custom
setting):
1. Select any mode to be stored.
2. Set your desired parameters in the
current mode.
3. Press the
button, press the
[ ]/[ ] button to select
, and press the button to enter the
menu.
4. Press the [
]/[ ] button to
select
.
To Next Page
Loading...
